Why do I need a roof replacement in Washington State?
- This is a requirement for homeowners insurance in Washington state and has been built into the local building codes to prevent the use of inferior roof covering products and to help facilitate updating homes from the old roofing products to the new roofing products.
How many layers of roofing are allowed in Washington state?
In Washington State it is a law that you can only have 2 layers of roofing on your structure. For example, if you already have 2 layers of asphalt composition shingles on your roof you cannot add a third.
What is a Class a roof?
Class A is the highest rating, offering the highest resistance to fire, and unrated is the worst. Examples of a Class A roof covering include concrete or clay roof tiles, fiberglass asphalt composition shingles and metal roofs. An example of an unrated covering is an untreated wood shake roof.
What is the minimum slope for a shingle roof?
What is the Minimum Slope for an Asphalt Shingle Roof. The short, simple answer is 2:12 has traditionally been considered the absolute minimum acceptable roof slope suitable for asphalt shingles. Asphalt shingles continue to be the most widely installed roof covering option in North America.
How big of a shed can you build without a permit in washington State?
You don’t need a permit to build a shed if it meets all of these criteria: The total area (or “footprint”) of the shed’s roof is 120 square feet or less. The shed is a single-story building. The shed sits on a simple concrete slab, pier blocks, or soil.
Can you repair a 2 layer roof?
If you already have two layers shingles, the decision is made for you. The International Residential Code says that you cannot put a new roof over two or more applications of any type of roof covering. Part of the reason has to do with weight and its effect on the structure of your home.
Is a double layer of shingles bad?
Warranty issues: Most shingle warranties do not apply when shingles are layered over existing roofing, according to InterNACHI. Two layers of shingles trap more heat, which in turn damages the shingles and shortens the life span of the roof. Adding a second layer could compromise the structure of your roof.
What is a Class C roof?
Class C roof assemblies are those that are effective against light fire-test exposure. Class C roof assemblies and roof coverings shall be listed and identified as Class C by an approved testing agency.
What is a Class 3 or 4 roof?
A Class 3 rating is given to shingles that do not crack after being hit by a steel ball, measuring 1.75” in diameter and dropped from twenty feet. Class 4 is the highest after taking a hit from the same twenty foot height with a two-inch steel ball.
What is a Class B roof?
Class B roof assemblies are those that are effective against moderate fire-test exposure. Class B roof assemblies and roof coverings shall be listed and identified as Class B by an approved testing agency.
Can you shingle a 2 pitch roof?
A roof with a 2/12 pitch can safely use shingles by incorporating additional layers of underlayment around the eaves.
Can you shingle a 3 pitch roof?
Low Sloped Roof Shingle Installation Shingles can be installed on low-sloped roofs with a pitch of 3/12 inches. However, it will require additional layers under the shingles, such as a double layer of asphalt-saturated felt paper or a single layer of ice and water shield.
What is the minimum pitch you can have on a roof?
Smallest Roof Pitch The smallest pitch of a roof is 1/4:12, which translates to 1/4 inch rise to 12 inches of run. Such a small pitch can only work with built-up roofing or specialized synthetic roofing. Covered porches that are near trees or in areas with heavy rains should not be covered with a low-slope roof.
What is the largest structure you can build without a permit in Washington?
Building a structure larger than 200 square feet without the required permits.
Do I need a permit to build a pergola in Washington state?
Yes, Construction of a cover over a deck or patio requires a building permit and must meet setbacks. Shade structures or arbors where the roof is not solid may be exempt from a building permit but must still meet setbacks.
Do I need a building permit for a concrete slab?
Do I Need a Permit for My Concrete Project? Regardless of whether you’re pouring a concrete driveway or patio, indoor concrete floor, or simply making concrete planter borders, municipal building regulations might require you to have a permit. Starting your project without the proper permits can result in hefty fines.